Replacing the optical-drive connector board, Procedure, Post-requisites – Dell Inspiron 17 (5748, Mid 2013) User Manual
Page 58
Advertising
Replacing the Optical-Drive
Connector Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide and connect the optical-drive connector board to the system
board.
2 Replace the screw that secures the optical-drive connector board to the
computer base.
Post-requisites
1
Replace the
.
2 Replace the
.
3 Replace the
4 Follow the procedures from step 3 to step 5 in replacing the
5 Replace the
6 Replace the
7
Replace the
.
58
Advertising