Dell OptiPlex 360 (Late 2008) - Manual (Page 34)

34 Specifications — Desktop Computer
PS/2 one, through PS/2 serial expansion card (low profile)
Parallel one 25-pin connector (bidirectional)
System board connectors:
SATA three 7-pin connectors
Floppy drive one 34-pin connector
Processor fan one 4-pin connector
Chassis fan one 3-pin connector
PCI Express x16 one 164-pin connector
Front panel control one 10-pin connector
Front panel USB one 10-pin connectors
Front panel audio HDA
header
one 10-pin connector
Processor one 775-pin connector
Memory four 240-pin connectors
Power 12 V one 4-pin connector
Power one 24-pin connector
LAN on motherboard
(LOM)
through RJ-45 connector on back panel
Controls and Lights
Front of computer:
Power button push button
Power light green light — Blinking green in sleep state; solid
green for power-on state
amber light — The blinking amber indicates a
problem with the system board. A solid amber light
when the computer does not start indicates that the
system board cannot start initialization. This
indication could be a system board or a power supply
problem (see "Power Problems" on page 37).
Connectors (continued)