Replacing the display assembly – Dell Alienware M17x R3 (Early 2011) User Manual
Page 73
Advertising
Display Assembly
73
Replacing the Display Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Place the display assembly in position and replace the six screws that
secure the display assembly to the computer base.
3 Route the display cable, camera cable, infrared cable, wirelessHD card
cable, and Mini-Card antenna cables through the routing guides on the
palm rest assembly.
4 Connect the display cable to the connector on the system board.
5 Tighten the two captive screws that secure the display cable to the system
board.
6 Connect the camera cable and infrared cable to the respective system
board connectors.
1
display assembly
2
screws (6)
1
2
Advertising