Replacing the status light board – Dell Alienware M17x R3 (Early 2011) User Manual
Page 76
76
Status Light Board
10 Lift the status light board off the palm rest assembly.
Replacing the Status Light Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the slots on the status light board with the alignment posts on the
palm rest assembly and secure the status light board in place.
3 Replace the two screws that secure the status light board to the palm rest
assembly.
4 Route the status light board cable through the routing guides on the palm
rest assembly.
5 Connect the status light board cable to the connector on the system board.
6 Replace the display assembly (see "Replacing the Display Assembly" on
7 Replace the keyboard (see "Replacing the Keyboard" on page 57).
1
screws (2)
2
status light board
3
status light board cable
1
2
3