Dell Dimension 9150/XPS 400 - Manual (Page 36)

36
Setting Up and Using Your Computer
Using Intel
®
Viiv™ Quick Resume Technology (Optional)
When running in the Intel Viiv Quick Resume Technology (QRT) mode, your power button is
used as a quick on/off feature. Pressing the power button once causes the display to go blank and
the audio to mute. In this mode, the computer is still operating as indicated by the power button
indicator and diagnostic lights 1, 2, and 4 being lit. Also, you may notice that the hard drive
indicator may blink when the hard drive is being accessed by an external device.
To resume normal computer operation, briefly press the power button, press any key on the
keyboard, move the mouse, or press a button on the optional Microsoft
®
Windows
®
XP Media
Center Edition 2005 remote control.
Enabling the QRT Feature in System Setup
The QRT drivers must be installed before this feature becomes active. These drivers are installed
when this option is ordered. Also, Quick Resume is enabled in system setup when this feature is
ordered.
1 Enter system setup (see page 114).
2 Press the arrow keys to highlight the Power Management menu option and press <Enter> to
access the menu.
3 Press the up- and down-arrow keys to highlight the Quick Resume option and press <Enter>
to access the menu.
4 Press the left- and right-arrow keys to highlight the On option and press <Enter> to enable
the Quick Resume feature.
Enabling the QRT feature in the Operating system
1 Click the Start button and click Control Panel.
2 Under Pick a category, click Performance and Maintenance.
3 Under or pick a Control Panel icon, click Power Options.
4 Click the Away tab.
5 Ensure that the check boxes for Enable away mode and Options are checked.
6 Click the Advanced tab.
7 From the When I press the power button on my computer drop-down menu, select Do
Nothing.
8 From the When I press the sleep button on my computer drop-down menu, select Do
Nothing.