Canon DC420 - Manual (Page 53)

Photos • 53
Erasing a Photo Right After Recording It
You can erase the still image recorded
last while reviewing it within the time set
for the [REVIEW] option (or immediately
after recording it, if [REVIEW] is set to
[
OFF]).
While reviewing the still image
immediately after recording:
1
Push the joystick ( ) toward .
2
Select ( ) [ERASE] and press
.
Basic Playback
Viewing Photos
1
Move the / switch to (still
images).
2
Turn the switch to ON, then
turn it toward MODE and release it
to set the camcorder in PLAY
mode.
The green PLAY indicator will turn on.
3
Push the joystick ( ) to move
between still images.
Push the joystick ( ) and hold it
down to run quickly through the still
images.
Image Jump Function
When you have recorded a large number
of still images, you can jump 10 or 100
images at a time.
( 21)
Basic Playback
( 21)