Dell Proximity Printing Solution - Manual (Page 26)

26 DPPS – Administrator’s Guide
DPPS Client Mode Interface
Connecting to the Server
You must set the server address when you launch DPPS client for the first time.
On the Change Server Name window, type the DPP server name and click OK.
After the DPPS server address is set, the utility will automatically connect to
the local DPPS server and download the necessary maps and information to
your computer. After the information is downloaded, the client will prompt
you to set your home printer.
Selecting Your Home Printer
After you specify a valid DPPS server address, a window appears showing the
resource map where you can choose your home printer.
NOTE: The home printer will be automatically centered on by DPPS client if your
computer is not connected to a wireless network, or if your computer is out of
range of any of the printers added to the DPPS server, but still able to reach the
DPPS server.