Dell 964 All In One Photo Printer - Manual (Page 97)

Data error Data error or incomplete data.
Press the Power button to reset,
and then resend your print job.
Scan error Scan carrier error. Turn off the printer, wait a few
seconds, and then turn on the printer.
Paper feed error A paper feed error has occurred. Check the paper paths for obstructions,
and then press the Power button
to reset. For more information,
Check
for a paper jam. .
Device Not Supported.
Please Disconnect
The attached device is not supported,
or the PictBridge-enabled digital
camera is not set to the correct USB
mode. Disconnect the device, or check the
USB mode setup. Refer to the
documentation that came with your
digital camera for more information.
Communications error
message The printer is not communicating with
the computer. Disconnect and then reconnect
the USB cable.
Disconnect and then reconnect
the printer power cable.
Restart the computer.
Remove and reinstall the printer
software. See
Removing and
Reinstalling Software .
Improving Print Quality
If you are not satisfied with the print quality of your documents, there are several different ways to improve
the print quality.
Use the appropriate paper. For example, use Dell Premium Photo Paper if you are printing photos with
a photo ink cartridge.
NOTE: Dell Premium Photo Paper may not be available in all areas.
Use paper that is a heavier weight, bright white, or coated. Use Dell Premium Photo Paper if you are
printing photos.
Select a higher print quality.
To select a higher print quality:
With your document open, click File Print. 1.
The Print dialog box opens.
Click Preferences, Properties, or Options (depending on your program or operating system). 2.
The Printing Preferences dialog box opens.
3.
4.