Replacing the battery, Procedure, Postrequisites – Dell Alienware M14x R2 (Early 2012) User Manual
Page 16
Advertising
3 Using the pull-tab, lift the battery off the computer base.
1
2
3
4
1
3
battery
captive screws (2)
2
4
pull-tab
battery cable
Replacing the Battery
Procedure
1 Place the battery in the battery bay and tighten the captive screws that
secure the battery to the computer base.
2 Connect the battery cable to the connector on the system board.
Postrequisites
1 Replace the base cover. See "Replacing the Base Cover" on page 16.
2 Follow the instructions in "After Working Inside Your Computer" on page 13.
Battery
18
Advertising