Speakers, Removing the speakers, Prerequisites – Dell Alienware M14x R2 (Early 2012) User Manual

Page 55: Procedure, 1 turn the palm-rest assembly over

Advertising
background image

14

Speakers

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 11. Fo
r additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

Removing the Speakers

Prerequisites

1 Remove the base cover. See "Removing the Base Cover" on page 15.
2 Remove the battery. See "Removing the Battery" on page 17.
3 Remove the center-control cover.

See "Removing the Center-Control Cover" on page 33.

4 Remove the keyboard. See "Removing the Keyboard" on page 37.
5 Remove the palm-rest assembly.

See "Removing the Palm-Rest Assembly" on page 41.

Procedure

1 Turn the palm-rest assembly over.
2 Note the routing of speakers cable and remove the cable from the routing

guides.

NOTE:

If the speakers cable is under the status-light board cable, remove the

status-light board cable first and then remove the speakers cable.

Speakers

57

Advertising