Dell OptiPlex GX270 - Manual (Page 152)

10. Pull the release lever straight up until the microprocessor is released.
1 securing clip
2 tab
3 retention base
1 heat sink
2 tab
3 retention base
NOTICE: If you are installing a microprocessor upgrade kit from Dell, discard the original heat sink. If you are not installing a microprocessor upgrade kit
from Dell, reuse the original heat sink and blower when you install your new microprocessor.
NOTICE: Be careful not to bend any of the pins when you remove the microprocessor from the socket. Bending the pins can permanently damage the
microprocessor.