Dell UP3214Q Monitor - Manual (Page 36)

36  Operating the Monitor
DisplayPort 1.2 Press the button to enable or disable
DisplayPort 1.2. To use the HBR2 feature, enable
DP1.2 to get 3840 x 2160, 60 Hz. See
Setting Up
the DP1.2 Display for more information.
NOTE: Ensure that your Graphics Card can support
these features before selecting DP1.2. Wrong
settings may result in blank screen. Some Graphics
Cards do not support MCCS (Monitor Control
Command Set) at DP1.2. In these cases, DDM (Dell
Display Manager) may not run.
NOTE: Ensure that your graphics card driver
can support DP1.2 with MST feature, capable of
displaying 3840 x 2160 at 60Hz and its driver
supports DisplayID v1.3, or the display may not
show correctly.
Display Info Displays the monitor’s current settings.
Reset Display
Settings Select this option to restore default display
settings.
PBP Settings This function brings up a window displaying image
from another input source. Thus you can watch
two images from different sources at the same
time.
Right-Window
(select from input
Source)
Left–window (select from
PBP source)
Mini DP DP HDMI
Mini DP x x √
DP x x √
HDMI √ √ x