Dell UP3214Q Monitor User Manual
Page 43
Operating the Monitor 43
When monitor enters Power Save Mode, the following message appears:
Dell UP3214Q
Entering Power Save Mode
Activate the computer and wake up the monitor to gain access to the
If you press any button other than the power button, one of the following
messages will appear depending on the selected input:
Dell UP3214Q
There is no signal coming from your computer. Press any key on the
keyboard or move the mouse to wake it up. If there is no display, press
the monitor button now to select the correct input source on the
On-Screen-Display menu.
If either HDMI, DP or m-DP input is selected and the corresponding cable is not
connected, a floating dialog box as shown below appears.
Dell UP3214Q
No DisplayPort Cable
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors
or
Dell UP3214Q
No Mini DisplayPort Cable
The display will go into Power Save Mode in 5 minutes.
www.dell.com/support/monitors
or