Drive-panel inserts – Dell OptiPlex 745c (Early 2007) User Manual
Page 65
Advertising
8.
Attach the SATA connector removed in
to the first hard drive.
9.
Locate an unused SATA connector on the system board and attach a data cable to this connector and to the second hard drive.
10.
Replace the computer cover (see
Replacing the Computer Cover
).
Drive-Panel Inserts
If you are installing a new floppy or optical drive instead of replacing a drive, remove the drive-panel inserts.
1.
Follow the procedures in
Before You Begin
.
2.
Remove the drive panel by sliding the drive release latch downward to open the panel. Then remove it from the hinges.
1
data cable
2
hard-drive system board connector
3
power cable
Advertising