Dell OptiPlex 745c (Early 2007) - Manual (Page 70)

6. Connect the power and data cables to the drive and to the system board.
7. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
8. Replace the computer cover (see Replacing the Computer Cover ).
9. Update your configuration information in system setup by setting the appropriate Drive option (0 or 1) under Drives. See System Setup .
10. Verify that your computer works correctly by running the Dell Diagnostics (see Dell Diagnostics ).
Back to Contents Page
1 power cable 2 data cable 3 SATA optical drive connector