Replacing the back cover, Procedure, Post-requisites – Dell Inspiron 20 (3043, Mid 2014) User Manual

Page 24

Advertising
background image

Replacing the Back Cover

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before Working Inside Your Computer

. After working inside your

computer, follow the instructions in

After Working Inside Your

Computer

. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1

Replace the

control-buttons board

.

2 Slide the hard-drive cable into the slot on the back cover.
3 Connect the battery cable to the system board.
4 Carefully turn the back cover over and align the tabs on the back cover

with the slots on the display bezel.

5 Snap the back cover into place.
6 Replace the screws that secure the back cover to the display bezel.

Post-requisites

Follow the procedure from step 7 to step 12 in “Replacing the

Hard Drive

”.

24

Advertising