Removing the power-status light board, Prerequisites, Procedure – Dell Inspiron 20 (3043, Mid 2014) User Manual
Page 34
Advertising
Removing the Power-Status
Light Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
Follow the instructions from step 1 to step 7 in “Removing the
”.
Procedure
1
Lift the connector latch and disconnect the power-status light cable from
the power-status light board.
2 Peel the tape that secures the power-status light board to the display
bezel.
3 Remove the screws that secure the power status-light board to the
display bezel.
34
Advertising