Replacing the speakers, Procedure, Post-requisites – Dell Inspiron 20 (3043, Mid 2014) User Manual
Page 39
Replacing the Speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the speakers with the screw holes on the display
bezel.
2 Replace the screws that secure the speakers to the display bezel.
3 Route the speaker cable on the display bezel and adhere the tape to
secure it.
4 Connect the speaker cable to the system board.
5 Slide the power-status light cable into the power-status light board
connector and press down on the connector latch to secure the cable.
Post-requisites
Follow the instructions from step 3 to step 6 in “Replacing the
”.
39