System messages – Dell Precision M4400 (Mid 2008) User Manual

Page 40

Advertising
background image

40

Troubleshooting

S

EEK

ERROR

The operating system cannot find a specific track on the hard

drive.

S

HUTDOWN

FAILURE

A chip on the system board may be malfunctioning.

Run the System Set tests in the Dell Diagnostics (see "Dell Diagnostics" on
page 42).

T

IME

-

OF

-

DAY

CLOCK

LOST

POWER

System configuration settings are

corrupted. Connect your computer to an electrical outlet to charge the
battery. If the problem persists, try to restore the data by entering the system
setup program, then immediately exit the program (see your Service Manual
at support.dell.com). If the message reappears, contact Dell (see "Contacting
Dell" on page 65).

T

IME

-

OF

-

DAY

CLOCK

STOPPED

The reserve battery that supports the system

configuration settings may require recharging. Connect your computer to an
electrical outlet to charge the battery. If the problem persists, contact Dell
(see "Contacting Dell" on page 65).

T

IME

-

OF

-

DAY

NOT

SET

-

PLEASE

RUN

THE

S

YSTEM

S

ETUP

PROGRAM

The time

or date stored in the system setup program does not match the system clock.
Correct the settings for the Date and Time options. See your Service Manual
at support.dell.com for more information.

T

IMER

CHIP

COUNTER

2

FAILED

A chip on the system board may be

malfunctioning. Run the System Set tests in the Dell Diagnostics (see "Dell
Diagnostics" on page 42).

U

NEXPECTED

INTERRUPT

IN

PROTECTED

MODE

The keyboard controller may

be malfunctioning, or a memory module may be loose. Run the System
Memory tests and the Keyboard Controller test in the Dell Diagnostics (see
"Dell Diagnostics" on page 42).

X

: \

IS

NOT

ACCESSIBLE

. T

HE

DEVICE

IS

NOT

READY

Insert a disk into the

drive and try again.

W

ARNING

: B

ATTERY

IS

CRITICALLY

LOW

The battery is running out of

charge. Replace the battery, or connect the computer to an electrical outlet;
otherwise, activate hibernate mode or shut down the computer.

System Messages

NOTE:

If the message you received is not listed in the table, see the documentation

for either the operating system or the program that was running when the message
appeared.

Advertising