Dell Latitude C400 - Manual (Page 22)

To replace the display latch, you must replace the whole bezel.
1. Remove the battery.
2. Remove the hard drive .
3. Open the display 180 degrees, and remove the six rubber screw covers and the six M2 x 4-mm screws that secure the
bezel.
Bezel Removal
1 bezel
2 display latch
3 M2 x 4-mm screw (6)
4 display assembly
4. Use a small flat-blade screwdriver to carefully pry around the perimeter of the bezel until the bezel separates from the
display assembly.
5. Install the new bezel.
Back to Contents Page