Dell Latitude C400 - Manual (Page 32)

1 M2 x 4-mm screws (2)
2 audio board shield
3 audio board
5. Remove the two M2 x 4-mm screws from the audio board shield, and remove the shield.
6. Pull the audio board up out of its connector.
Replacing the Audio Board
The audio board can be easily misaligned. When replacing it, first align the two screw holes in the board with the holes in the
bosses. Then, as you press the audio board into the connector, sight sideways between the audio board and the system board
to ensure that all pins on the audio board connector are headed correctly into the system board connector.
Back to Contents Page