Dell Inspiron 600m - Manual (Page 55)

Using CDs, DVDs, and Other Multimedia
55
Enabling the Display Settings for a Television
ATI Video Controller
NOTE:
Ensure that you properly connect the television before you enable the display settings.
1 To open the Control Panel window, click the Start button and then click the
Control Panel icon.
2 Double-click the Display icon, click the Settings tab, and then click Advanced.
3 Click the Displays tab.
4 Click the upper-left corner of the TV button to enable the television.
5 To play a DVD on the television, click the small "primary" button (resembles a bull’s-eye) at
the lower left under the TV picture.
NOTE:
Various programs access the hardware in different ways. You may or may not need to click the
primary button for operations other than playing DVDs.
6 Click Apply.
7 Click Yes to keep the new settings.
8 Click OK.
DVD video is visible only on the display that is set to primary. While the DVD is playing, the
DVD player window on your computer display is blank or (if the DVD player window is set to
full-screen mode) the entire computer display screen is blank.