Dell A920 All In One Personal Printer - Manual (Page 14)

Select a higher quality from the Document/Quality tab of Print Properties, Preferences, or from the All-
In-One Center:
Open the Dell All-In-One Center. For help, refer to your Owner's Manual. a.
From the Copy... section, click See More Copy Settings. b.
From the Copy quality area, select a higher print quality than what you are currently using. c.
Test the cartridge alignment. For help, see Aligning the ink cartridges .
Clean the nozzles. For help, see Cleaning the ink cartridge nozzles.
Print is too dark or smudged
Make sure:
You let the ink dry completely before handling the paper.
You select the correct paper type and size in Print Properties, Preferences, or in the All-In-One Center.
The paper is straight and unwrinkled.
You select the appropriate quality for the paper type. If you are printing on regular paper, select the
Quick Copy setting from the Document/Quality tab of Print Properties, Preferences, or from the All-In-
One Center.
The nozzles are clean. For help, see Cleaning the ink cartridge nozzles.
White lines appear in graphics or solid black areas
Clean the ink cartridge nozzles. Going long periods without using the printer can cause the ink cartridge
nozzles to become clogged. For help, see
Cleaning the ink cartridge nozzles .
Print quality is poor at the edges of the page
Like other printers, your All-In-One cannot print in the extreme left, right, top, or bottom edges of a page.
Use these minimum settings:
Left and right margins:
6.35 mm (0.25 in.) each for all paper sizes except A4
3.37 mm (0.133 in.) each for A4 size paper
Top margin:
1.7 mm (0.067 in.)