Replacing the i/o board, Procedure, Post-requisites – Dell Inspiron 15 (3542, Early 2014) User Manual
Page 54
Advertising
Replacing the I/O Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the I/O-board cable into the I/O-board connector and press down
on the connector latch to secure the cable.
2 Turn the I/O board over and snap the I/O board into place.
Post-requisites
1
Follow the procedure from step 3 to step 9 in “Replacing the
”.
2 Replace the
.
3 Follow the procedure from step 4 to step 6 in “Replacing the
”.
4 Replace the
.
5 Replace the
.
54
Advertising