Dell Precision 420 - Manual (Page 28)

5. Insert the Dell ResourceCD into the CD-ROM drive.
6. Press <Alt><b> to exit system setup and save the change.
The computer reboots and the Dell logo screen appears followed by a list of the available languages.
7. Select the number for the language that you want.
A numbered list of eight options appears.
8. Select Option 2 – Dell Diagnostics by typing 2 and pressing <Enter>. After the diagnostics load, the following Diagnostics Main Menu
screen appears:
9. Select an option from the Diagnostics Main Menu screen by pressing the up- or down-arrow key to highlight the option and pressing
<Enter>, or press the key that corresponds to the highlighted letter in the option title.
l Test All Devices — Performs quick or extensive tests on all devices.
l Test One Device — Performs quick or extensive tests on a single device after you select it from a list of device groups. After
you select Test One Device, press <F1> for more information about a test.
l
Advanced Testing — Allows you to modify the parameters of a test, select a group of tests to perform, and access additional
information about Advanced Testing.
l Information and Results — Provides test results, test errors, version numbers of subtests, and additional information on the
Dell Diagnostics.
l Program Options — Allows you to change the settings of the Dell Diagnostics.
l Exit to MS-DOS — Exits to the MS-DOS® prompt.
10. Select Quick Tests from the Test All Devices or Test One Device option to perform a quick check of your computer or a specific device.
Quick Tests runs only the subtests that run fast and do not require user interaction. Dell recommends that you select Quick Tests first to
increase your chance of locating the problem quickly.
11. Select Extended Tests from the Test All Devices or Test One Device option for a thorough check of your computer or to check a
particular area of your computer.
12. Select the Advanced Testing option to customize your test(s).
13. Remove the ResourceCD from the CD-ROM drive when you have finished running the Dell Diagnostics.
Advanced Testing
When you select Advanced Testing from the Diagnostics Main Menu screen, the following advanced testing screen appears.
NOTE: If you are starting the ResourceCD for the first time on this computer, the ResourceCD Installation window opens to
inform you that the ResourceCD is about to begin installation. Click OK to continue. To complete the installation, respond to the
prompts offered by the installation program. If the Welcome Dell System Owner screen opens, click Next to continue.
NOTE: To change the boot sequence, repeat steps 1 through 6, set the boot sequence to fit your needs, and restart your computer.