Dell Inspiron 5160 - Manual (Page 4)

7. To avoid possible damage to the system board, wait 10 to 20 seconds and then disconnect any attached devices.
8. Disconnect all other external cables from the computer.
9. Remove any installed pc cards from the pc card slot.
Recommended Tools
The procedures in this manual require the following tools:
l #1 Phillips screwdriver
l ¼ -inch flat-blade screwdriver
l Small plastic scribe
l Hex nut driver
l Flash BIOS update program CD
Computer Orientation
Screw Identification
When you are removing and replacing components, photocopy this section to lay out and keep track of the screws and their sizes.
1 front
2 left
3 back
4 right
Hard Drive Door:
(2 each)
Modem to
System Board:
(2 each)
Optical Drive:
(1 each)