Base cover, Removing the base cover – Dell XPS 14Z (L412Z, Late 2011) User Manual
Page 11
Base Cover
11
2
Base Cover
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices
information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
a connector on your computer).
Removing the Base Cover
1 Follow the instructions in "Before You Begin" on page 7.
2 Remove the eight screws that secure the base cover to the palm-rest
assembly.
3 Starting from the rear end, use your fingertips to release the tabs on the
base cover from the slots on the palm-rest assembly.
book.book Page 11 Thursday, May 3, 2012 3:09 PM