Replacing the display-converter board – Dell XPS 14Z (L412Z, Late 2011) User Manual
Page 40
40
Display-Converter Board
Replacing the Display-Converter Board
1 Follow the instructions in "Before You Begin" on page 7.
2 Connect the display-converter-board cable, and the display cable to the
connectors on the display-converter board.
3 Align the screw holes on the display-converter board with the screw holes
on the palm-rest assembly.
4 Replace the two screws that secure the display-converter board to the
palm-rest assembly.
5 Connect the display-converter-board cable to the system-board connector.
6 Replace the battery (see "Replacing the Battery" on page 16).
7 Replace the base cover (see "Replacing the Base Cover" on page 12).
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1
system-board connector
2
screws (2)
3
display cable connector
4
display-converter board
1
2
4
2
3
book.book Page 40 Thursday, May 3, 2012 3:09 PM