Dell Vostro 1510 (Early 2008) - Manual (Page 43)

Template Last Updated - 2/7/2007 Processor Thermal-Cooling Assembly
43
DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY
Processor Thermal-Cooling
Assembly
Removing the Processor Thermal-Cooling
Assembly
CAUTION:
Before you begin the following procedure, follow the safety
instructions that shipped with your computer.
1 Follow the instructions in "Before Working on Your Computer" on page 29.
2 Loosen the two screws that secure the memory cover. (See "Removing a
Memory Module" on page 49 for an illustration of the memory cover.)
3 Slide the cover out of the compartment and set it aside.
4 Remove the fan (see "Removing the Fan" on page 41).
5 In sequential order, loosen the six captive screws that secure the processor
thermal-cooling assembly to the system board, and carefully lift the
processor thermal-cooling assembly out of the computer.