Dell XPS 720 H2C (Mid 2007) User Manual
Page 101
Advertising
Removing and Installing Parts
101
5 Disconnect any cables connected to the card.
6 Press down the tab on the top of the card retainer at the appropriate card slot and pivot the card
retainer back through the chassis wall.
7 Press the release tab (if present) on the system board connector as you grasp the card by its top corners,
and then ease the card out of the connector.
NOTE:
If the card is full length, press the release tab on the end of the alignment guides on the fan bracket.
1
release tab
2
card retainer
3
alignment guide
4
fan bracket
1
2
3
4
Advertising