Installing a media card reader – Dell XPS 720 H2C (Mid 2007) User Manual

Page 121

Advertising
background image

Removing and Installing Parts

121

6 Replace the drive panel (see "Replacing the Drive Panel" on page 114).
7 Replace the computer cover (see "Replacing the Computer Cover" on page 160).

NOTICE:

To connect a network cable, first plug the cable into the network port or device and then plug it into the

computer.

8 Connect the computer and devices to electrical outlets, and turn them on.

Installing a Media Card Reader

1 Follow the procedures in "Before You Begin" on page 85.
2 Remove the computer cover (see "Removing the Computer Cover" on page 86).
3 Remove the drive panel (see "Removing the Drive Panel" on page 113).
4 Remove the existing media card reader, if applicable (see "Removing a Media Card Reader" on

page 119).

5 If no screws are attached to the Media Card Reader, check the inside of the drive panel for shoulder

screws. If screws are present, attach the screws to the new card reader.

1

drive release latch

2

media card reader

1

2

Advertising