Installing the processor – Dell XPS 720 H2C (Mid 2007) User Manual
Page 133
Advertising
Removing and Installing Parts
133
6 Lift the socket release lever and open the processor cover.
7 Remove the processor from the socket.
Leave the release lever extended in the release position so that the socket is ready for the new
processor.
Installing the Processor
NOTICE:
Ground yourself by touching an unpainted metal surface on the back of the computer.
1 Unpack the new processor.
NOTICE:
You must position the processor correctly in the socket to avoid permanent damage to the processor and
the computer when you turn on the computer.
2 If the release lever on the socket is not fully extended, move it to that position.
1
processor cover
2
processor
3
socket
4
socket release lever
1
2
3
4
Advertising