Installing the cable-management arm, Routing cables, Installing the rack bezel – Dell PowerEdge 2900 User Manual
Page 24: Installing the rack doors
Advertising
22
Tower-to-Rack Conversion Guide
Installing the Cable-Management Arm
See the procedures contained in the system
Rack Installation Guide.
Routing Cables
See the procedures contained in the system
Rack Installation Guide.
Installing the Rack Bezel
To install the bezel, hook the right end of the bezel onto the chassis, then fit the free end of the bezel
onto the system. Secure the bezel with the keylock. See Figure 1-10.
Figure 1-10.
Installing the Rack Bezel
Installing the Rack Doors
See the documentation provided with the rack for instructions on installing rack doors.
1
keylock
2
rack bezel
1
2
book.book Page 22 Friday, May 26, 2006 3:03 PM
Advertising