Wireless charging coil, Removing the wireless charging coil, Replacing the wireless charging coil – Dell Latitude Z (Late 2009) User Manual

Page 32

Advertising
background image

Back to Contents Page

Wireless Charging Coil

Dell™ Latitude™ Z600 Service Manual

Removing the Wireless Charging Coil

1.

Follow the procedures in

Before Working Inside Your Computer

.

2.

Remove the

battery

from the computer.

3.

Remove the

hinge covers

from the computer.

4.

Remove the

access panel

from the computer.

5.

Disconnect the two cables that connect the charging coil to the system board.

6.

Remove the screws that secure the charging coil to the system board.

7.

Remove the wireless charging coil from the computer.

Replacing the Wireless Charging Coil

To replace the wireless charging coil, perform the steps above in the reverse order.

Back to Contents Page

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTE:

You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.

Advertising