Dell PowerVault 770N (Deskside NAS Appliance) - Manual (Page 43)

jumper
Jumpers are small blocks on a circuit board with two or more pins emerging from them. Plastic plugs containing a wire fit
down over the pins. The wire connects the pins and creates a circuit. Jumpers provide a simple and reversible method of
changing the circuitry in a printed circuit board.
K
Abbreviation for kilo-, indicating 1,000.
KB
Abbreviation for kilobyte(s), 1,024 bytes.
KB/sec
Abbreviation for kilobyte(s) per second.
Kbit(s)
Abbreviation for kilobit(s), 1,024 bits.
Kbit(s)/sec
Abbreviation for kilobit(s) per second.
key combination
A command requiring you to press multiple keys at the same time. For example, you can reboot your system by pressing the
<Ctrl><Alt><Del> key combination.
kg
Abbreviation for kilogram(s), 1,000 grams.
kHz
Abbreviation for kilohertz, 1,000 hertz.
LAN
Acronym for local area network. A LAN system is usually confined to the same building or a few nearby buildings, with all
equipment linked by wiring dedicated specifically to the LAN.
lb
Abbreviation for pound(s).
LED
Abbreviation for light-emitting diode. An electronic device that lights up when a current is passed through it.
local bus