Installing the fan assembly, D. see figure 3-11, Drive 1 if installed. see figure 3-11 – Dell PowerEdge 860 User Manual
Page 58: Figure 3-11, Posts and out of the chassis. see figure 3-11
Advertising
58
Installing System Components
Figure 3-11.
Installing and Removing the Fan Assembly
Installing the Fan Assembly
1 Align the holes in the fan assembly with the two fan assembly securing posts. See Figure 3-11.
2 Lower the fan assembly until the release levers snap onto the securing posts.
3 Route the cables in the fan assembly cable tray. See Figure 3-11.
4 Reconnect the hard drive 1 data cable to the hard drive. See Figure 3-11.
5 Reconnect the fan assembly power cable to the system board.
6 Install the cooling shroud. See "Installing the Cooling Shroud" on page 48.
7 Close the system. See "Closing the System" on page 47.
1
release levers (2)
2
power cable
3
securing posts (2)
4
hard drive 1 data cable
5
cable tray
3
5
2
4
1
Advertising