Dell PowerEdge 860 - Manual (Page 62)

62
Installing System Components
Figure 3-13. Installing and Removing the Power Supply
Installing the Power Supply
1 Lower the power supply into the chassis and slide it backward until the four pins on the power supply
are engaged into the securing brackets.
2 Using a #2 Phillips screwdriver, install the screw at the front of the power supply that secures the
power supply to the chassis.
1 screw 2 P1 connector 3 P2 connector
4 power supply 5 pins (4) 6 securing brackets (4)
7 P3 connector
7
5
6
1
2
3
4