Dell Inspiron XPS Gen 2 - Manual (Page 38)

10. Lift the display assembly away from the computer.
Replacing the Display Assembly
1. Align the display assembly over the screw holes in the base of the computer.
2. Thread the Mini PCI antenna cables back through the hole in the base of the computer.
3. Replace the four M2.5 x 5-mm screws.
4. Connect the LED cable to the system board.
5. Connect the display cable to the system board.
6. Replace the center control cover.
7. If a Mini PCI card is installed, connect the antenna cables to the card. If one is not installed, tuck the antenna cables to their secured location.
8. Replace the Mini PCI card cover.
Display Bezel