System board, Removing the system board – Dell Inspiron XPS Gen 2 User Manual
Page 67
Back to Contents Page
System Board
Dell™ Inspiron™ XPS Service Manual
Removing the System Board
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the
system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
1.
Follow the instructions in "
Before Working Inside Your Computer
."
2.
Remove the
hard drive
.
3.
Remove the
optical drive
.
4.
Remove the
memory module(s)
.
5.
Remove the
Mini PCI card
.
6.
Remove the
modem
.
7.
Remove the center control cover.
8.
Remove the
keyboard
.
9.
Remove the
display assembly
.
10.
Turn the computer over and disconnect the modem cable from the system board connector.
11.
Disconnect the modem cable from the modem.
12.
Remove the
palm rest
.
CAUTION:
Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1 modem system board
connector
2 modem cable