Installing the fingerprint-scanner board, Removing the display bezel – Dell Latitude 6430u (Late 2012) User Manual
Page 23
c) base cover
d) keyboard
e) palmrest assembly
3.
Un-route the fingerprint-scanner cable. Remove the screw that secures the fingerprint-scanner bracket to the
computer and remove the fingerprint-scanner bracket. Remove the fingerpint-scanner board from the computer
Installing the Fingerprint-Scanner Board
1.
Place the fingerprint-scanner in its slot on the computer.
2.
Place the fingerprint-scanner bracket on it and tighten the screw to secure the fingerprint-scanner bracket to the
computer.
3.
Route the fingerprint scanner cable.
4.
Install:
a) palmrest assembly
b) keyboard
c) base cover
d) SD card
e) battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Display Bezel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the battery.
3.
Pry the sides and work around the corners of the display bezel and remove it from the display assembly.
23