Dell D/Port Advanced Port Replicator - Manual (Page 17)

Most Dell computers are classified by the Voluntary Control Council for Interference (VCCI) as Class B information technology
equipment (ITE). However, the inclusion of certain options can change the rating of some configurations to Class A. ITE,
including devices, expansion cards, printers, input/output (I/O) devices, monitors, and so on, integrated into or connected to
the computer should match the electromagnetic environment classification (Class A or B) of the computer.
To determine which classification applies to your computer, examine the regulatory labels/markings (see "VCCI Class A ITE
Regulatory Mark" and "VCCI Class B ITE Regulatory Mark") located on the bottom, side, or back panel of your computer.
Once you have determined your computer's VCCI classification, read the appropriate VCCI notice.
This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI) for information
technology equipment. If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble
occurs, the user may be required to take corrective actions.
If the regulatory label includes the following marking, your computer is a Class A product:
This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for information
technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause
radio interference. Install and use the equipment according to the instruction manual.
If the regulatory label includes the following marking, your computer is a Class B product:
MIC Notice (Republic of Korea Only)
To determine which classification (Class A or B) applies to your computer (or other Dell digital device), examine the Republic
of Korean Ministry of Information and Communications (MIC) registration labels located on your computer (or other Dell
digital device). The MIC label may be located separately from the other regulatory marking applied to your product. Line two
of the label identifies the emissions class for the product—"(A)" for Class A products or "(B)" for Class B products.
NOTE: MIC emissions requirements provide for two classifications:
Class A devices are for business purposes.
Class B devices are for nonbusiness purposes.