Dell D/Port Advanced Port Replicator - Manual (Page 6)

Bottom View
NOTE: For information on the optional monitor stand or the D/View portable-computer stand, see the documentation
that came with the stand.
1 monitor stand connector
monitor stand connector — Connects the APR to the optional monitor stand.
Before You Dock for the First Time
NOTE: Alert your network administrator before you connect the APR to a network.
Before you initially connect your computer to the APR, the operating system must complete its setup process. To verify that
the operating system has completed the setup process:
1. Ensure that the computer is not connected to the APR (docked).
2. Turn on the computer.
3. Verify that your computer operating system completes the setup process and that the Microsoft® Windows® desktop
appears.
4. Shut down the computer.
Docking the Computer
You must attach an AC adapter to the APR before you dock and turn on the computer. The AC adapter powers the APR and
the computer at the same time. Any battery installed in the computer charges while you are using the APR.
NOTICE: Always use the Dell AC adapter that came with the APR. If you use any other commercially available AC
adapter, you may damage the APR or the computer.