Modifying share properties, Removing a share, Removing a protocol from the share – Dell PowerVault 770N (Deskside NAS Appliance) User Manual
Page 13
See the context sensitive online help for more information on the properties for each protocol.
10. Click OK.
Modifying Share Properties
1. Log in to the NAS Manager.
2. Click Shares.
3. On the Shares page, click Shares.
4. In the Shared Folders table, click the share you want to modify.
5. Click Properties.
The Share Properties page is displayed. Use this page to change the properties of the share, such as the protocols it
supports.
6. Click OK.
Removing a Share
When you remove a share, the share becomes inaccessible; however, the actual files remain on the NAS system.
To remove a share, perform the following steps:
1. Log in to the NAS Manager.
2. Click Shares.
3. On the Shares page, click Shares.
4. In the Shared Folders table, click the share that you want to delete.
5. Click Delete.
A confirmation dialog appears.
6. Click OK to confirm the deletion, or click Cancel to keep the share.
Removing a Protocol From the Share
Because a share may have more than one protocol assigned, it is possible to remove a protocol from a share without
removing the remaining protocols.
To remove one or more specific protocols from a share, perform the following steps:
1. Log in to the NAS Manager.