Dell PowerVault 770N (Deskside NAS Appliance) - Manual (Page 51)

2. Click Maintenance.
3. Click Backup.
4. Log on to the system as administrator.
NOTE: The default user name is administrator and the default password is powervault.
The Welcome to the Backup or Restore Wizard window displays.
NOTE: If the window does not display, on the NAS system's desktop, click the Start button and select
Programs → Accessories→ System Tools→ Backup, and then click Windows Backup/Recovery.
5. In the Backup or Restore Wizard window, click Next.
6. In the Backup or Restore window, click Restore files and settings, and click Next.
If you do not see the media that contains your restoration files, skip to step 7. Otherwise, perform the following steps:
a. Click the plus (+) sign next to File.
b. Click the plus (+) sign next to the media that contains the restoration files.
c. Select System State.
d. Click Next.
e. Go to step 8.
7. If you do not see the media that contains your restoration files, you must import the files.
After a reinstallation, you must import the file because your system is not aware of previous backups.
a. Click Browse.
The Open Backup File window is displayed.
b. Click Browse.
The Select file to catalog window is displayed.
c. After locating your file, click Open, and then click OK.
The What to Restore window is displayed.
d. Click the plus (+) sign next to File.
e. Click the plus (+) sign next to the backup file (.bkf).
You are prompted for your backup file location.
f. If the location is correct, click OK. Otherwise, browse to the correct backup file location.
The backup appears in the What to Restore window.