Dell Inspiron 15R SE (7520, Mid 2010) - Manual (Page 52)

52 | System Board
6 Remove the screws that secure the system board to the computer base.
7 Lift the system board to disconnect the connector on the system board from the
connector on the daughter board.
8 Lift the system board at an angle and release the connectors on the system board
from the slots on the computer base.
9 Remove the thermal-cooling assembly. See "Removing the Thermal-Cooling
Assembly" on page 55.
10 Remove the processor. See "Removing the Processor" on page 59.
Replacing the System Board
Procedure
1 Replace the processor. See "Replacing the Processor" on page 61.
2 Replace the thermal-cooling assembly. See "Replacing the Thermal-Cooling
Assembly" on page 57.
3 Slide the connectors on the system board into the slots on the computer base.
4 Gently press the system board to connect the connector on the system board to
the connector on the daughter board.
5 Replace the screws that secure the system board to the computer base.
1 system-board assembly 2 screws (6)
1
2
book.book Page 52 Thursday, April 12, 2012 10:14 AM