Dell Inspiron 15R SE (7520, Mid 2010) - Manual (Page 80)

80 | Mini-Card
3 Lift the Mini-Card out of the connector on the daughter board.
CAUTION: When the Mini-Card is not in the computer, store it in protective
antistatic packaging. For more information, see "Protecting Against Electrostatic
Discharge" in the safety information that shipped with your computer.
Replacing the Mini-Card
Procedure
1 Remove the new Mini-Card from its packaging.
2 Align the notch on the Mini-Card with the tab on the connector on the daughter
board.
CAUTION: Use firm and even pressure to slide the Mini-Card into place. If you use
excessive force, you may damage the connector.
CAUTION: The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the Mini-Card and on the daughter board,
and realign the Mini-Card.
CAUTION: To avoid damage to the Mini-Card, never place cables under the
wireless Mini-Card.
3 Insert the Mini-Card connector at a 45-degree angle into the connector on the
daughter board.
book.book Page 80 Thursday, April 12, 2012 10:14 AM