Dell PowerVault NX3600 User Manual
Page 35
Advertising
Figure 22. Removing and Installing the Expansion-Card Holder
1. release latch
2. card holder
3. expansion-card cage
4. notch
6.
Using a #2 Philips screwdriver, loosen the captive screw that secures the expansion-card latch to the expansion-
card riser cage.
7.
Pull the expansion-card latch out of the expansion-card riser cage.
8.
Hold the expansion card by its edges and remove it from the expansion-card connector on the riser.
35
Advertising