Labeling, Transceivers, Labeling transceivers – Dell POWEREDGE M1000E User Manual
Page 17
Dell M8428-k Hardware Reference Manual
5
53-1001980-01
Hardware description
1
FIGURE 2
Top view
Labeling
shows the labels appearing on the switch module. A second serial label is located beneath
the release lever on the enclosure (visible only when the lever is extended).
Transceivers
NOTE
You must install Dell-approved transceivers in the switch module.
The converged network switch was designed to work with small form-factor pluggable (SFP) optical
modules. The basic switch module ships with four 8 Gbps Dell-approved transceivers for the Fibre
Channel ports.
NOTE
You can also install 4 Gbps transceivers in the FC ports of the switch module. All transceivers must
be Dell-approved.
1
Switch module release lever
2
Release latch
3
Product label including serial number
4
Midplane connectors
4
3
2
1