Dell Inspiron 9400 - Manual (Page 123)

Adding and Replacing Parts
123
5 Ground yourself and install the new memory module:
a Align the notch in the module edge connector with the tab in the connector slot.
b Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it
clicks into place. If you do not feel the click, remove the module and reinstall it.
6 Replace the memory module cover.
NOTICE:
If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may
damage your computer.
7 Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical
outlet.
8 Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system
configuration information. If prompted, press <F1> to continue.
To confirm the amount of memory installed in the computer, click the Start button, click Help and
Support, and then click Computer Information.
PD598a01.book Page 123 Monday, February 6, 2006 2:24 PM