Dell Inspiron 9400 - Manual (Page 129)

Adding and Replacing Parts
129
6 Replace the Mini-Card/modem cover.
Hinge Cover
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE:
To avoid damaging the system board, you must remove the battery before you begin working inside the
computer.
1 Follow the procedures in "Before You Begin" on page 117.
2 Remove the hinge cover.:
a Open the display all the way (180 degrees) so that it lies flat against your work surface.
NOTICE:
To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously.
b Insert a scribe into the indent to lift the hinge cover on the right side.
c Ease the hinge cover up, moving from right to left, and remove it.
PD598a01.book Page 129 Monday, February 6, 2006 2:24 PM